Mitutoyo EV Counters Series 542 for Multi-Gage System

Description

Mitutoyo EV Counters Series 542 for Multi-Gage System

Features:

• Up to six gages can be connected to one unit, extendable up to 10 units (60 gages at maximum) using the RS Link function* to facilitate the configuration of a multi-point measurement system. * Refer to “Quick Guide to Precision Measuring Instruments” on page G-32 for details of the RS link.
• A range of output modes to choose from: I/O output for tolerance judgment and segment output, BCD data output and RS-232C output are available.
• Other than normal measurement, peak measurement or differential measurement between gages are available.

Function:

• External Control (Zero-set, Preset etc.)
• Direction switch
• Error display
• Tolerance judgment output
• Diverse data output (RS-232C, BCD, Segment)
• Peak measurement Maximum value, minimum value, runout, and differential measurement between two gages Addition, averaging, maximum value, minimum value, and maximum width

Optional Accessories:

• D-EV External display unit: No.02ADD400
• SPC cable (0.5m): No.02ADD950
• SPC cable (1m): No.936937
• SPC cable (2m): No.965014
• AC adapter: No.02ADN460*
• AC cable (USA): 02ZAA010*
• Terminal connecting cable: No.02ADD930*
  * Included in package Order No.

LED display: 8 digits for parameter display (displays settings), 1 for error display
Error message: Overspeed, gage error etc.
External display: Dedicated external display unit D-EV (optional) can be connected.
Function of input switches: Measurement mode switching, parameter setting

Input/ output Tolerance judgment output 1 to 6 channels (L1, L2, L3), open-collector BCD output Parallel BCD output (positive/negative-true logic), open-collector Segment output Function to set on only the terminals corresponding to the counting values, open-collector Control output Normal operation signal (NOM), open-collector Control input Output channel designation (segment, in the BCD mode), presetting, peak value clear, range changeover (at segment output), holding counting value open-collector or no-voltage contact signal (with/without contact point).

Interface:

• RS-232C:
  Measurement data output and control input
  EIA RS-232C-compatible Use cross cables for home position, DTE (terminal definition).

RS link:

• Max. connecting unit: 10 (6 when using EF counter)
• Connecting cable length: Max. 10m (sum of link cable length)
• Data transfer time: 1sec./60ch (when transmission rate is 19200bps)

Rating:

• Power supply voltage: 12 – 24V DC, terminal block (M3 screw)
• Power consumption: 8.4W or less (700mA max.) Ensure at least 1A is available per unit.
• Operating temperature:(humidity) range 0 to 40C (RH 20 to 80%, no condensation)
• Storage temperature:(humidity) range 10 to 50C (RH 20 to 80%, no condensation)
• External dimensions: 144 (W) x 72 (H) x 139 (D) mm

Specifications:

Order No 542-063 542-064 542-067 Package No.
(counter w/
AC adapter 64PKA137 64PKA138 64PKA139 Model EV-16P EV-16D EV-16Z Applicable input Differential square-wave Digimatic code (SPC) Differential square-wave Applicable gage LGE, LGF, LGK, LGB, LGM, LG
not compatible with reference
point mark,sine wave output
type or 0.1m resolution models LGD, LGS LGF with origin point mark No of inputchannels 6 6 6 Resolution .000005, .00005, .0005″ /
0.0005, 0.001, 0.005, 0.01mm .00005*, .0005″ /
0.001*, 0.01mm .000005, .00005, .0005″ /
0.0005, 0.001, 0.005, 0.01mm Mass 910g 830g 910g

Model EV-16P for use with:

• Mitutoyo Linear Gages LGF Series 542

Model EV-16Zfor use with:

• Mitutoyo Linear Gages LGF-Z with Origin Point Mark Series 542