Uponor F1041000R AquaPEX 1 in. x 100 ft. White PEX-A Expansion Pipe | Bigbigmart.com

Description

Uponor F1041000R AquaPEX 1 in. x 100 ft. White PEX-A Expansion PipeUponor AquaPEX white is a PEX-a pipe designed for use in hot, cold, and hot-water recirculation potable-water distribution systems. The pipe has the highest chlorine resistance rating of 5 and offers one month of UV resistance. It can also be used in hydronic or radiant heating and cooling applications, however, because the pipe does not have an oxygen-diffusion barrier, it is only appropriate in systems that contain no ferrous corrodible components or where any ferrous components are isolated from the pipe. The PEX-a manufacturing method provides exceptional flexibility, strength, and durability, allowing a bend radius of 6X the pipe diameter to help eliminate unnecessary connections with each change in direction. Also, the pipe elasticity allows it to expand up to 3X its diameter and then shrink back down. This provides exceptional resiliency in freeze/thaw conditions. Note that no piping system is completely freeze proof, but PEX-a provides greater resiliency compared to rigid piping systems. Uponor PEX-a pipe is designed for use with Uponor ProPEX fittings, which require the use of a ProPEX expansion tool and ProPEX rings (sold separately).PEX-a manufacturing for superior flexibility, strength, and durability100 ft. length coil to help eliminate unnecessary connectionsDesigned for use with F1960 expansion connections that allow higher flow and maximum system performanceGreater resiliency in freezing conditions compared to rigid piping systemsKink repairable with a simple shot of heat from a heat gunNo oxygen barrier on pipe so ferrous components in hydronic or radiant heating and cooling systems must be isolatedPrimarily designed for use in hot and cold potable-water distribution systemsPipe in sizes from 3/4 in. to 1 1/4 in. approved for use in Uponor AquaSAFE multipurpose plumbing and fire sprinkler systemsCompatible with PEX compression, clamp, crimp, press, expansion, and push-to-connect fitting systemsManufactured and listed to ASTM F876 and F877 and certified to NSF Standards 14 and 61Rated and listed at 200F at 80 pieces, 180F at 100 pieces, and 73.4F at 160 piecesProPEX expansion connections require use of ProPEX expansion tool and ProPEX rings (sold separately)DimensionsActual inside diameter (in.)0.862Actual outside diameter (in.)1.125Nominal Inside Pipe Diameter (In.)1Pipe Wall Thickness (In.)0.125Product Length (ft.)100 ftDetailsApplicationPotable Water, Water SupplyColor FamilyWhiteColor/FinishWhiteConnectivityBarbMaterialCross-Linked Polyethylene (PEX)Maximum Flow Rate (gallons per minute)18.19Maximum working pressure (psi)160Maximum Working Temperature (F)200Minimum working temperature (F)33Pack Size1PEX TypeAPipe FeaturesFlexible, UV Resistant, Underground Rated, Underground UsePipe or Fitting Product TypePipe & TubingProduct Weight (lb.)21 lbAdditional ResourcesFrom the ManufacturerWarrantyInstallation Guide