Suburban Sine Vises

Description

Suburban Sine Vises

• Provides a quick and accurate means of holding a workpiece at an angle for grinding or inspection.

• Angled center channel provides extra holding capacity.

• Solid, one-piece body.

• Made from steel, hardened to Rc 58-60.

• Movable jaw pulls into base at 45 to 60 to insure maximum holding power and hold down force, eliminating tilting and lifting.

• Dual 0.200″ minute steps built into the gage roll allow setting small angles with standard gage blocks.

• SV-337 models have small horizontal and vertical vees in the movable jaw and a ratchet mechanism with notched pockets and a one-piece drawbar.

• One locking strap included with each sine vise.

• SineSet models bolt directly to a SineSet sine plate or compound sine plate of the same series. S1 models also bolt to the AP-664-S1 90 conversion plate.

Specifications:

SineSet COMPATIBLE MODEL # SV-337-S1 SV-411-S2 SV-612-S2 SineSet Series S1 S2 S2 L 7-1/2″ 11″ 12″ W 3″ 4″ 6″ H 3-5/8″ 4-5/8″ 5-1/8″ J 1-5/16″ 1-7/16″ 1-11/16″ JAW CAPACITY 4-3/4″ 7″ 8″ C 5″ 0.0002″ 10″ 0.0002″ 10″ 0.0002″ SQUARE & PARALLEL 0.0002″ 0.0003″ 0.0003″ Weight 16 lbs. 36 lbs. 60 lbs. NOT SineSet COMPATIBLE MODEL # SV-337 SV-411 SV-612 L 7-1/2″ 11″ 12″ W 3″ 4″ 6″ H 3-5/8″ 4-5/8″ 5-1/8″ J 1-5/16″ 1-7/16″ 1-11/16″ JAW CAPACITY 4-3/4″ 7″ 8″ C 5″ 0.0002″ 10″ 0.0002″ 10″ 0.0002″ SQUARE & PARALLEL 0.0002″ 0.0003″ 0.0003″ Weight 16 lbs. 36 lbs. 60 lbs.